English 
Deutsch 
Français 
Español 
OX36ESM3 – Embout extérieur pour bôme Optimist 40 mm Optimax MK3
Vous aimerez peut-être aussi…
-
PLUS D'INFOSOX35M3 – Bôme Optimist 40 mm Optimax MK3
A lightweight and flexible 40 mm racing boom which is mainly suitable for sailors below 35 kg.
- High grade alloy, dark grey anodized
- Glass fibre filled nylon in- and outboard end fittings
- Glass fibre filled nylon V-shaped outhaul cleat
- Glass fibre filled nylon lacing eyes
- Fitted with outhaul trim strip
- 3.5 mm Polyester outhaul line
- 3 mm Dyneema boom preventer line
- 3 mm Dyneema bridle with stainless steel ring
- 3 mm Dyneema primary vang line
- 5 mm Dyneema / Technora secondary vang line
Produits similaires
-
PLUS D'INFOSOX61S – Collier de mât pour bague d’étambrai
This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
-
PLUS D'INFOSOX31 – Pied de mât Optimist ajustable, type rond/cuvette
The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.
