English 
Deutsch 
FranƧais 
EspaƱol 
OX36ESM3 – TerminaciĆ³n popa botavara Optimist 40 mm Optimax MK3
TambiĆ©n te recomendamos…
-
MORE INFOOX35M3 – Botavara Optimist 40 mm Optimax MK3
A lightweight and flexible 40 mm racing boom which is mainly suitable for sailors below 35 kg.
- High grade alloy, dark grey anodized
- Glass fibre filled nylon in- and outboard end fittings
- Glass fibre filled nylon V-shaped outhaul cleat
- Glass fibre filled nylon lacing eyes
- Fitted with outhaul trim strip
- 3.5 mm Polyester outhaul line
- 3 mm Dyneema boom preventer line
- 3 mm Dyneema bridle with stainless steel ring
- 3 mm Dyneema primary vang line
- 5 mm Dyneema / Technora secondary vang line
Productos relacionados
-
MORE INFOOX61S – Cuello del aro fogonadura Optimist gris Optimax
This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve ā you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
-
MORE INFOOX65 – Lineas de control Technora Optimist
High performance Optimist upgrade kit, consisting of outhaul, downhaul and halyard system.
Pro Line Outhaul
3.5 mm HT Polyester outhaul for excellent grip in the cleat.Pro Line Vang
3 mm spliced DyneemaĀ® primary line with a 5 mm TechnoraĀ® and DyneemaĀ® secondary line for ultimate grip in the cleat, durability and ensures extremely good wear resistance characteristics. The non-spliced DyneemaĀ® end has enough length to be tied or spliced around the boom.Pro Line Halyard System
High performance TechnoraĀ® and DyneemaĀ® halyard with a spliced loop on one end to be fixed easily on the mast cleat. The other end is tapered which makes it thin enough to fit through the halyard handle. This halyard system comes with the OX60R Dyneema replacement halyard with spliced on low friction ring. -
MORE INFOOX61CS – Aro fogonadura Optimist gris con cuello Optimax
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve ā you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
