OX25 – Set d’accastillage pour gréement Optimax
– 2 x Nylon top pins
– 1 x Wind indicator PRO
– 1 x Dyneema halyard line
– 1 x Harken ball bearing hook-in block
– 1 x Windesign 25mm low friction ring
– 1 x Nylon sprit adjuster handle
– 1 x 4mm Vectran halyard line
– 1 x Deck collar with mast sleeve
– 5 x 2.2mm tack lines
– 12 x 1.2mm double lacing lines
OX61CS – Bague d’étambrai basse friction avec collier, grise
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.