English 
Deutsch 
Français 
Español 
OX24MBS – Optimax measurement band sticker Optimist
Related products
-
MORE INFOOX65 – Pro line Optimist upgrade package
High performance Optimist upgrade kit, consisting of outhaul, downhaul and halyard system.
Pro Line Outhaul
3.5 mm HT Polyester outhaul for excellent grip in the cleat.Pro Line Vang
3 mm spliced Dyneema® primary line with a 5 mm Technora® and Dyneema® secondary line for ultimate grip in the cleat, durability and ensures extremely good wear resistance characteristics. The non-spliced Dyneema® end has enough length to be tied or spliced around the boom.Pro Line Halyard System
High performance Technora® and Dyneema® halyard with a spliced loop on one end to be fixed easily on the mast cleat. The other end is tapered which makes it thin enough to fit through the halyard handle. This halyard system comes with the OX60R Dyneema replacement halyard with spliced on low friction ring. -
MORE INFOOX61C – Optimax low friction deck collar Optimist
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
A seperate sleeve is available which is fitted around the mast at deck level and protects the mast from wearing.
-
MORE INFOOX61CS – Optimax low friction deck collar with mast sleeve Optimist
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
