English 
Deutsch 
Français 
Español 
OX25 – Rigg-pack für Optimax mast
As supplied with Optimax masts and Optimax spar sets.
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines
Beschreibung
Ähnliche Produkte
-
MEHR INFOOX61C – Optimist Mastdurchführung grau Optimax
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
A seperate sleeve is available which is fitted around the mast at deck level and protects the mast from wearing.
-
MEHR INFOOX31 – Edelstahl Optimist Mastfuß verstellbar
The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.
-
MEHR INFOOX61S – Optimist Mastring grau Optimax
This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
