English 
Deutsch 
Français 
Español 
OX7L – Anneau de friction Windesign 25 mm pour cordage de livarde Optimist
Produits similaires
-
MORE INFOOX61C – Bague d’étambrai seule sans collier
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
A seperate sleeve is available which is fitted around the mast at deck level and protects the mast from wearing.
-
MORE INFOOX31 – Pied de mât Optimist ajustable, type rond/cuvette
The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.
-
MORE INFOOX25 – Set d’accastillage pour gréement Optimax
As supplied with Optimax masts and Optimax spar sets.
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines
