English 
Deutsch 
Français 
Español 
OX60 – Optimist Spriteverstellung mit zwei Harken Blöcke
Optimist halyard system with 3 mm Dyneema with spliced loops and supplied with the Harken hook-in block and 29 mm Harken tie-lite block.
Ähnliche Produkte
-
MEHR INFOOX61CS – Optimist Mastdurchführung mit Mastring grau Optimax
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
-
MEHR INFOOX60B – Optimist Spriteverstellung mit Windesign Gleitring und Harken Block
Optimist Halyard system with Windesign low friction ring. This halyard system is used on all Optimax spars from 2017. The combination of Harken hook-in block, Dyneema spliced halyard line and Windesign low friction ring creates the most advanced halyard system on the market.
