English 
Deutsch 
Français 
Español 
OX70RF – Ferrures de safran set Optimist
Set of rudder fittings for the Optimist. Long and short.
Produits similaires
-
MORE INFOOX61CS – Bague d’étambrai basse friction avec collier, grise
The Optimax Optimist deck collar is made of Delrin to create minimal friction between the sleeve and the collar. The oval inner diameter allows the maximum fore/aft and minimum side play and the tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.
The mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Optimax spars.
Mounting the sleeve – you will notice the sleeve is slightly smaller than the mast. To mount the sleeve you should gently warm the sleeve with a hairdryer or paint stripper. You can easily slide the warm sleeve over the mast into position.
-
MORE INFOOX25 – Set d’accastillage pour gréement Optimax
As supplied with Optimax masts and Optimax spar sets.
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines
