English 
Deutsch 
Français 
Español 
OX45M3 – Livarde Optimist 27 mm Optimax MK3
The MK3 sprit is an allround 27 mm sprit which is suitable for the majority of the sailors.
- Superior Lanurep spacecraft alloy
- Anodized to a dark grey color
- Grey glass fibre filled Nylon sprit ends
- 15 cm heat shrinkable sprit protection tubing,
prevents wear between mast and sprit
Produits similaires
-
MORE INFOOX35M3 – Bôme Optimist 40 mm Optimax MK3
A lightweight and flexible 40 mm racing boom which is mainly suitable for sailors below 35 kg.
- High grade alloy, dark grey anodized
- Glass fibre filled nylon in- and outboard end fittings
- Glass fibre filled nylon V-shaped outhaul cleat
- Glass fibre filled nylon lacing eyes
- Fitted with outhaul trim strip
- 3.5 mm Polyester outhaul line
- 3 mm Dyneema boom preventer line
- 3 mm Dyneema bridle with stainless steel ring
- 3 mm Dyneema primary vang line
- 5 mm Dyneema / Technora secondary vang line
-
MORE INFOOX25AB3M – Mât Optimist Optimax MK3 Medium
The MK3 MEDIUM mast fits perfectly in our mast range between the regular MK3 and MK3 FLEX; it’s 8% more flexible compared to the MK3 mast and 8% stiffer compared to the MK3 FLEX mast. The MK3 MEDIUM mast for the Optimist is mainly suitable for sailors from 30 to 40 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
-
MORE INFOOX234M3F – Gréement Optimist complet Optimax MK3 Flex
MK3 Flex spar set for the Optimist. Suitable for sailors below 35 kg
Material: Superior Lanurep spacecraft alloy
Anodized: Top grade hard dark grey- MK3 Flex mast (OX25AB3F)
- MK3 40 mm boom (OX35M3
- MK3 27 mm sprit (OX45M3)
Supplied with rigging pack (OX25):
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines -
MORE INFOOX45M3HF – Livarde Optimist 28 mm Optimax MK3 Hyperflex
The most flexible racing sprit creates less distortion of the sail shape and provides an active change of tension on the leech. For the more experienced sailor who can adjust their mainsheet tension constantly.
- Superior Lanurep spacecraft alloy
- Anodized to a dark grey color
- Grey glass fibre filled Nylon sprit ends
- 15 cm heat shrinkable sprit protection tubing,
prevents wear between mast and sprit