OX45M3 – Percha Optimist 27 mm Optimax MK3
The MK3 sprit is an allround 27 mm sprit which is suitable for the majority of the sailors.
- Superior Lanurep spacecraft alloy
- Anodized to a dark grey color
- Grey glass fibre filled Nylon sprit ends
- 15 cm heat shrinkable sprit protection tubing,
prevents wear between mast and sprit

Productos relacionados
-
OX234M4 – Juego de Palos Optimist Optimax MK4
MK4 spar set for the Optimist. Suitable for sailors from 45 kg
Material: Superior Lanurep spacecraft alloy
Anodized: Top grade hard dark grey- MK4 mast (OX25AB4)
- MK4 45 mm boom (OX35M4)
- MK3 27 mm sprit (OX45M3)
Supplied with rigging pack (OX25):
1 x Harken ball bearing hook-in block
1 x Windesign 25 mm low friction ring
1 x Windesign wind indicator PRO
1 x Deck collar with mast sleeve
1 x Nylon sprit adjuster handle
2 x Nylon top pins
1 x Dyneema primary halyard line
1 x Technora / Dyneema secondary halyard line
5 x 2.2 mm tack lines
12 x 1.2 mm double lacing lines -
OX25AB3F-NP – Mástil Optimist Optimax MK3 Flex – sin paquete de aparejo
The most flexible and active mast which is designed for lightweight sailors. The MK3 Flex mast for the Optimist is mainly suitable for sailors below 35 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Low friction end stop
-
OX25AB3 – Mástil Optimist Optimax MK3
This allround racing mast is designed for mid weight sailors and can be matched with all booms and sprits. The MK3 mast for the Optimist is mainly suitable for sailors from 35 to 45 kg.
- Superior Lanurep spacecraft alloy
- High grade 45 um hard anodized surface
- Windesign wind indicator PRO
- Pennant holders
- Harken hook-in block
- 3 mm Dyneema primary halyard line with Windesign low friction ring
- Technora / Dyneema secondary halyard line
- Hard anodized aluminium Clamcleat
- Aluminium pin stop
- Sprit adjuster handle
- Low friction end stop
-
OX35M5 – Botavara Optimist 48 mm Optimax MK5
A lightweight yet ultra stiff and powerful 48 mm racing boom which is mainly suitable for the more experienced, heavier weight sailors above 45 kg.
This boom comes with an improved bridle system, an adjusted outhaul cleat position and a colored PRO outhaul trimstrip.
- High grade alloy, dark grey anodized
- Glass fibre filled nylon in- and outboard end fittings
- Glass fibre filled nylon V-shaped outhaul cleat
- Glass fibre filled nylon lacing eyes
- Fitted with the colored PRO outhaul trim strip
- 3.5 mm Polyester outhaul line
- 3 mm Dyneema boom preventer line
- 3 mm Dyneema bridle with two stainless steel rings
- 3 mm Dyneema primary vang line
- 5 mm Dyneema / Technora secondary vang line